| Sun Blade-1000- Information Page |
|
|
| Where to Buy |
|
Best Price |
|
New In Box (NIB) |
|
|
|
|
Sun Blade[tm] 1000 Workstation

Sun Blade 1000
Processors | Main Memory | Standard Interfaces | Internal Mass Storage | Power Supplies
Environment | Regulations | Dimensions and Weight
Processors
top |
Number: Up to Two
Architecture: 600-, 750-, 900-MHz UltraSPARC[tm] III, or 900-MHz UltraSPARC III Cu
X6990A - 750MHz UltraSPARC III Module
X7009A - 900MHz UltraSPARC III Cu Module
X6898A - 600MHz UltraSPARC III Module
X7000A - 900MHz UltraSPARC III Module
501-5770 - 900MHz UltraSPARC III Module
501-6002 - 900MHz UltraSPARC III Cu Module
501-6286 - 900MHz UltraSPARC III Module
Cache Memory: 4-MB External Cache for 600-MHz models
8-MB External Cache for 750- and 900-MHz models
501-4143 - Blade 1000 Motherboard
501-6230 - Motherboard Assembly
|
Main Memory
top |
X7051A - 2GB Memory kit (4 x 512MB SDRAM DIMMs)
X7053A - 1GB Memory kit (4 x 256MB SDRAM DIMMs)
X7062A - 2GB CR1/LC1 Memory kit (4 x 512MB SDRAM DIMMs)
X7063A - 4GB CR1/LC1 Memory kit (4 x 1GB SDRAM DIMMs)
X7050A - 512MB Memory kit (4 x 128MB SDRAM DIMMs)
X7052A - 4GB Memory kit (4 x 1GB SDRAM DIMMs)
X7061A - 1GB CR1/LC1 Memory kit (4 x 256MB SDRAM DIMMs)
X7050A - 512MB (4 × 128MB SDRAM DIMMs)
Capacities: Eight Sun 232-pin Sdram DIMM slots; 2 banks of 4, 4 DIMMs per bank (recommended that DIMMS added in groups of four)
128-MB, 256-MB, and 1-GB DIMMs
8-GB maximum, ECC error correction
|
Standard Interfaces
top |
Audio: Four audio ports: headphone(out), line-in, line-out and microphone(in) using EIA
standard 0.125-inch (3.5-mm) jacks
Ethernet: One ethernet/fast ethernet (10BASE-T/100BASE-T) twisted-pair standard connector (RJ-45), self-sensing.
X4444A - Quad GigaSwift Ethernet UTP (QGE)
X1033A - Sun FastEthernet PCI Adapter (FE/P) 2.0
X1034A - Quad FastEthernet PCI (QFE/P)
X1141A - Gigabit Ethernet PCI (GBE/P) 2.0
X1150A - Sun GigaSwift Ethernet UTP (Copper)
X1151A - Sun GigaSwift Ethernet MMF (Fiber)
X3150A - Sun GigaSwift Ethernet UTP (Copper)
X3151A - Sun GigaSwift Ethernet MMF (Fiber)
X4150A - GigaSwift Ethernet UTP (GCS)
X4151A - GigaSwift Ethernet MMF (GFS)
FC-AL: One Fibre Channel Arbitrated Loop (FC-AL) connector
IEEE 1394: Two IEEE 1394 (6-pin) connectors
Keyboard and mouse: USB (uses one of the four standard USB (Type A) ports)
Parallel: One IEEE 1284 (bidirectional) parallel port (DB25) PCI: Four 64-bit PCI slots, full-size, three at 33 MHz, one at 66-MHz
SCSI:
One single-ended, 68-pin, SCSI connector (16-bit Ultra/Fast/Wide, 40-MB/sec)
Serial: Two RS-232C/RS-423 serial ports (DB25)
UPA Graphics Slot: Two UPA graphics slots
X3256A - XVR-1000 Graphics Accelerator (FFB3)
X3668A -
PGX32 8/24-Bit Color Frame Buffer
X3670A - Creator3D Series 3 (FFB2+)
X3677A -
Elite3D-m3 Series 2 Accelerator
X3678A -
Expert3D 24-Bit Color Frame Buffer
X3679A - Elite3D-m6 Series 2 Accelerator
X3684A -
Expert3D Lite PCI Frame Buffer
X3685A -
XVR-500 Graphics Accelerator
X3768A - PGX64 8/24-Bit Color Frame Buffer
USB: Four standard Universal Serial Bus (USB) Type A connectors
|
Internal Mass Storage
top
|
Disks: Up to two 18-, 36- or 73-GB, 10K rpm FC-AL disk drive
X6742A - 73.4GB - 10000 RPM
X6724A - 36.4GB - 10000 RPM
X6728A - 18.2GB - 10000 RPM
Floppy Disk: Optional 3.5-in. 1.44-MB floppy
X6006A -
Manual Eject Triple Density Floppy
DVD-ROM: Optional 10X-speed DVD-ROM
X6168A - 10X DVD-ROM Drive
Tape: Optional 12-24GB 4-mm DDS-3 tape Drive
X6282A - 12-24GB 4 mm DDS-3 Tape Drive
X6295A - 20-40GB 4 mm DDS-4 Tape Drive (Medium Grey Bezel)
|
Enviornment
top |
300-1357 - Power Supply for Blade 1000
AC input: 100 - 240 VAC, 47 - 63 Hz, 8 A(max), 0.875 KVA
Input power: 670 W
Heat Output: 2286 BTU/hr
Temperature : Operating: 5° C to 40° C (41° F to 104° F) without tape drive; 5° C to 35° C (41° F to 95° F) with tape drive
Nonoperating: -40° C to 60° C (-40° F to 140° F)
Humidity: Operating: 20% to 80% relative humidity, noncondensing
Nonoperating: 5% to 93% relative humidity, noncondensing Altitude: Operating: 3000 m (10,000 ft)
Nonoperating: 12,000 m (40,000 ft)
Acoustic Noise: Operating: 5.64 bels
Idling: 4.77 bels
Vibration: Operating: 0.2 G peak, three mutually perpendicular axes, 5 to 500 Hz
Nonoperating: 1.0 G peak, all axes, 5 to 500 Hz
Shock: Operating: 5.0G for 11 milliseconds, half-sine pulse
Nonoperating: 30G for 11 milliseconds, half-sine pulse
Number of cords: 1
Plug Type-U.S.: NEMA 5-15P
|
Regulations :(meets or exceeds the following requirements)
top |
Safety: UL 1950, CSA C22.2 No. 950, TUV EN 60950, CB Scheme with Nordic deviations,
EMKO-TSE (74-SEC) 203, ZH1/618
RFI/EMI: FCC Class B, DOC Class B, VCCI Class 2, EN 55022 Class B, EN 61000-3-2
Immunity: EN 50082-1
X-ray: DHHS 21 Subchapter J; PTB German X-ray Decree
Power Management: Energy Star compliant
|
Dimensions and Weights
top |
Height : 45.5 cm (17.9 in.)
Width: 25.4 cm (10.0 in.)
Depth: 61.0 cm (24.0 in.)
Weight: 32 kg. (70 lbs.)
|
Sun Blade 1000 1-750 : Sun Blade 1000 2-750 : A28-PS2-9C-2GMAJ : A28-PS2-9C-2048JB : A28-PS2-9C-2048JB : A28-PS2-9C-2048JB : Sun Blade 1000 2-750 : A28-UNF2-9B-2048JB : A28-UNF1-9C-1024JB : A28-USF1-9C-1024JB
Where to buy:
Sun Blade[tm] 1000 Workstation
IBM Parts : Sun Parts : Cisco Parts : SAN - Fiber Channel HBA's
|
| Legal Disclaimer: this site is in no way endorsed or affiliated with Sun Microsystems, Inc. This site is independently run and in no way represents Sun Microsystems, Inc. Sun Does not officially sponsor, approve, or endorse this site or its content. THIS DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. |